Aiphone AI-900 Manual de usuario descargar pdf (Pagina 14)

__________________________ Aiphone AI-900 RTU Guide Ver 3.x ______________________________

Substation groups must conform to settings in

the AI-900 driver. The default RTU (and

default driver settings) define the base station

number (the first station as programmed in the

AI-900) as Station No 10, that there are 16

stations per group and that there can be up to

6 groups. The reason that a grouping of 16

stations was chosen is because each AI-900

station card can accommodate up to 16

separate connections.

Note: The AI-900 is required to

be programmed in order to

recognize the groups and stations.

This programming is not

accomplished in Intelli-Site.

Refer to the AI-900 manual for

information on this.

The illustration below shows the AI900 tab in

the driver configuration settings page. To

access this tab, select the driver from Drivers

Services.exe and then choose the tab.

Based on the settings shown above, the

addressing for Substation groups will be as

shown in the table below:

Station

Group

Address

1st

Station

Address

Last

Station

Address

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Sin comentarios

Aiphone AI-900 Manual de usuario Pagina 14