Aiphone CommunCenter Especificaciones

Busca en linea o descarga Especificaciones para Software Aiphone CommunCenter. Aiphone CommunCenter Specifications Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 4
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
- INSTRUCTIONS -
The IPW-1A offers voice-quality Intercom function over standard IP based networks. Designed specifically to integrate
seamlessly into a new or existing LAN / WAN infrastructure, the IPW-1A system is capable of supporting hundreds of
stations. Providing intercom/paging solutions to a large variety of applications including commercial, industrial,
residential, general security, office, and institutional.
IPW-1A
Intercom-Over-IP Adaptor
Pg. 1
1 NAMES & FEATURES
FEATURES:
· Cost-effective multi-master (PC-based) based design
· Compatible with IE Series sub stations and AX-DM
· Scalable to hundreds of stations / locations
· Works with standard wired and wireless network infrastructure. (LAN/WAN)
· Digital audio recording and playback capability via included software.
· Relay output for remote release (N/O or N/C)
IPW-1A
0211
Package Contents:
(1) IPW-1A
(1) PT-1211C
(1) Mounting hardware
(1) Software CD
(1) Install manual
Rear plate
IN0 IN1 NC C NO PWR
Front plate
NAMES & FUNCTIONS:
1. Reset switch (reset unit)
2. RS-232 Serial Port (for firmware recovery)
3. Green and Red Status Lights
4. Sub station connector
5. Door release relay output &
external input.
Door release:
NC = Normally closed contact
NO = Normally open contact
C = Common
External input:
IN0 = call button input (simulates door call in)
IN1 = sensor input (changes icon in CommuniCenter adaptor list)
Gnd = ground
6. RJ-45 10/100 ethernet jack & connection indicator LED’s (network
connection)
7. Power input connector
1 2 3 4
5 6
7
IN0 IN1 NO C NC
Vista de pagina 0
1 2 3 4

Indice de contenidos

Pagina 1 - 1 NAMES & FEATURES

- INSTRUCTIONS -The IPW-1A offers voice-quality Intercom function over standard IP based networks. Designed specifically to integrate seamlessly into

Pagina 2 - 2 INSTALLATION & MOUNTING

2 INSTALLATION & MOUNTINGInstallation Instructions:1. If the IPW-1A adaptor is not on the same LAN or network segment as the PC master station, en

Pagina 3 - 5 HARDWARE DIAGNOSTICS

Pg. 34 STATION SET-UPDHCP Enabled:· An IP address will automatically be assigned to each IPW-1A with the default ID# as 0 and Location Name left blan

Pagina 4 - 6 SPECIFCATIONS

Device running / normal operation:· During normal operation, the Green LED will remain on while the Red LED will remain off.Pushing the reset button:

Comentarios a estos manuales

Sin comentarios